Email:dfh8@ningbodfh.cnNingbo Defa Technology Co.,Ltd.

Ningbo Defa Technology Co.,Ltd.

Product Categories
Contact Us
Ningbo Yinzhou Defa Aluminum Profile Accessories Co.,Ltd
Add:No.44 Lengshui'an Road, Yinjiang Twon, Haishu Zone, Ningbo, China
Lean Pipe Good Lean Tools, To Achieve Significant Results

Lean Pipe of the connotation is not just "lean production", it is not only the production of the upgrade, it is the management level of the upgrade. In addition to the workshop, how do we expand lean in other areas?

When the enterprise will lean practice from the production area extended to marketing, playing version, fabric research and development, administrative personnel and other departments, will face the above questions. Regardless of the type of process used in lean thinking, we should keep ourselves humble and return to the basic lean principle to think.

If you just follow suit, such as unit work, kanban, SMED, etc., you may be farther away from the actual situation, then you are farther away from lean. We need to return to the original origin: to improve the problem where the "time and space angle" in order to use good tools, to achieve significant results.

1, starting from the end of the horizontal pipe tooling surface, you can quickly create a stable structure to facilitate the next step in the production of Lean Pipe tooling. Note: The first layer of the use of Lean Pipe will ensure long, wide, high length of the same, otherwise it will cause the tooling out of the irregular shape.

2, with a marker pen in the Lean Pipe tooling frame structure on the high mark on the remaining layer should be in the location, and then step by step to build. Note: During the construction process in order to save costs, will be reused before the production of the remaining materials. But the length of these materials shall not be shorter than the length of the material required 30mm, and can only be used for the middle layer production.

3. Install the casters or plastic jackets at the bottom of the IBC frame structure (top of the figure). CAUTION: When installing the casters, be careful to tighten the screws in the casters. With the tightening of the screw, the rubber ring of the wheel will gradually expand, and will eventually be tightly set in the Lean Pipe. If the screws do not tighten, the turnover of the car in the push process, there may be dump truck dumping, resulting in broken items fall damaged.

4, the entire Lean Pipe tooling frame structure over, to see whether the entire structure is stable, length and width are the same, for a simple adjustment of the problem. Finally, tighten the screws on the frame structure once, to avoid some screws forget to tighten.

5, in the Lean Pipe tooling frame to increase the platen and other materials, so that meet the application requirements.

6, on the lean pipe tooling production site for finishing, cleaning, in order to facilitate the development of other work. Good working habits are a guarantee of high work efficiency, must be in the usual work to develop good habits, both in the field management and the usual work are particularly important.

Copyright © Ningbo Defa Technology Co.,Ltd. All Rights Reserved.
QR Code